The Gerber method is used worldwide as a simple and rapid method for determining fat in raw and processed milks. However, the volume of the test portion used in the method has not been internationally agreed upon. A collaborative study was conducted to evaluate performance of the Gerber method using either a weighed test portion (11.13 g) or by a 10.77 mL test portion delivered by pipet. For each method, laboratories received 10 test samples: 5 raw and 5 pasteurized homogenized milks, 2 of which were blind duplicate pairs. Eleven and 10 laboratories participated in the evaluation of aliquot addition by weight and pipet, respectively. Mojonnier ether extraction (Method 989.05) was used as the reference method. Interlaboratory study statistics were similar between methods of test portion addition and between raw and processed materials; therefore, summary interlaboratory study statistics were pooled. The fat content of milk samples ranged from 0.96 to 5.48%. Absolute reproducibility and repeatability were not affected by fat level, and pooled statistical performance (invalid and outlier data removed) was (g fat/100 g milk) s(r) = 0.026, s(R) = 0.047, r = 0.074, and R = 0.132. Relative standard deviations increased with decreasing fat content, and were summarized by fat level: 1-2% fat milk, mean = 1.437, RSD(r) = 1.809%, RSD(R) = 3.271%; 2-6% fat milk, mean = 4.156, RSD(r) = 0.626%, RSD(R) = 1.131%. Compared with ether extraction, test results by the Gerber method were slightly lower (0.02% fat) using a weighed test portion and significantly lower (0.06% fat) using a 10.77 mL volume addition by pipet. A trend toward underestimating fat content at lower fat concentrations (1-2% fat) was observed with the weighed test portion but not when a pipet was used. The Associate Referee recommends that the Gerber method using a weighed test portion be adopted as First Action with applicability limited to whole milk.