BIOMAT Database Logo BIOMAT Database Logo

Microtensile bond strength between crown and root dentin and two adhesive systems. 2007

Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Department of Restorative Dentistry, Piracicaba School of Dentistry, State University of Campinas, Piracicaba, SP, Brazil. degoes@fop.unicamp.br

BACKGROUND Since bonding agent effectiveness is usually evaluated on coronal substrates, available knowledge for judging the effectiveness of bonds to root dentin is insufficient. OBJECTIVE The objective of this study was to evaluate the bond strength of 2 adhesive systems to crown, cervical finish line, and post space dentin. METHODS Twenty bovine maxillary incisors were used in this study. Teeth were sectioned along the cemento-enamel junction using a low-speed diamond blade to separate the crowns and roots. Then the crowns and roots were each divided into 2 groups, according to the 2 adhesive systems tested (n=10). The facial enamel surfaces of the crowns were abraded with 600-grit silicon carbide paper to expose flat, midcoronal dentin surfaces. Drills and a diamond rotary cutting instrument were used in a low-speed handpiece to prepare post spaces in the root canals. The same diamond rotary instrument was used to prepare horizontally flat surfaces in the cervical areas, similar to the horizontal aspect of a shoulder finish line. Composite resin was placed incrementally into the post spaces, over the flat cervical shoulder areas, and on the coronal dentin. Bonded beam specimens (0.5 mm(2) of cross-sectional area) derived from crown, cervical finish line, and post space dentin, were prepared for microtensile bond testing and tested in tension. Data were analyzed using 2-way ANOVA and Tukey post hoc test (alpha=.05). Failure patterns of tested specimens were analyzed using scanning electron microscopy. RESULTS The mean tensile bond strength values (SD) (MPa) were: Single Bond-crown: 29.8 (4.0); Single Bond-finish line: 18.7 (4.3); Single Bond-post space: 17.0 (4.8); Clearfil SE Bond-crown: 30.1 (6.4); Clearfil SE Bond-finish line: 30.4 (5.3); and Clearfil SE Bond-post space: 17.0 (4.2). Bond strengths to post space dentin were lower than those to coronal dentin for both adhesives (P<.001). However, no significant difference was observed between coronal and finish line dentin for Clearfil SE Bond. CONCLUSIONS Bond strength was reduced when adhesives were used in bonding to post space dentin. Cervical finish line sites bonded using Clearfil SE Bond adhesive yielded bond strength similar to that of coronal dentin sites.

UI MeSH Term Description Entries
D008422 Materials Testing The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility. Biocompatibility Testing,Biocompatible Materials Testing,Hemocompatibility Testing,Testing, Biocompatible Materials,Testing, Hemocompatible Materials,Hemocompatibility Testings,Hemocompatible Materials Testing,Materials Testing, Biocompatible,Materials Testing, Hemocompatible,Testing, Biocompatibility,Testing, Hemocompatibility,Testing, Materials,Testings, Biocompatibility
D001840 Dental Bonding An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing. Bonding, Dental,Cure of Orthodontic Adhesives,Curing, Dental Cement,Dental Cement Curing,Orthodontic Adhesives Cure
D002417 Cattle Domesticated bovine animals of the genus Bos, usually kept on a farm or ranch and used for the production of meat or dairy products or for heavy labor. Beef Cow,Bos grunniens,Bos indicus,Bos indicus Cattle,Bos taurus,Cow,Cow, Domestic,Dairy Cow,Holstein Cow,Indicine Cattle,Taurine Cattle,Taurus Cattle,Yak,Zebu,Beef Cows,Bos indicus Cattles,Cattle, Bos indicus,Cattle, Indicine,Cattle, Taurine,Cattle, Taurus,Cattles, Bos indicus,Cattles, Indicine,Cattles, Taurine,Cattles, Taurus,Cow, Beef,Cow, Dairy,Cow, Holstein,Cows,Dairy Cows,Domestic Cow,Domestic Cows,Indicine Cattles,Taurine Cattles,Taurus Cattles,Yaks,Zebus
D003799 Dental Stress Analysis The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures. Analyses, Dental Stress,Analysis, Dental Stress,Stress Analyses, Dental,Stress Analysis, Dental,Dental Stress Analyses
D000818 Animals Unicellular or multicellular, heterotrophic organisms, that have sensation and the power of voluntary movement. Under the older five kingdom paradigm, Animalia was one of the kingdoms. Under the modern three domain model, Animalia represents one of the many groups in the domain EUKARYOTA. Animal,Metazoa,Animalia
D013718 Tensile Strength The maximum stress a material subjected to a stretching load can withstand without tearing. (McGraw-Hill Dictionary of Scientific and Technical Terms, 5th ed, p2001) Strength, Tensile,Strengths, Tensile,Tensile Strengths
D014092 Tooth Root The part of a tooth from the neck to the apex, embedded in the alveolar process and covered with cementum. A root may be single or divided into several branches, usually identified by their relative position, e.g., lingual root or buccal root. Single-rooted teeth include mandibular first and second premolars and the maxillary second premolar teeth. The maxillary first premolar has two roots in most cases. Maxillary molars have three roots. (Jablonski, Dictionary of Dentistry, 1992, p690) Root, Tooth,Roots, Tooth,Tooth Roots
D017220 Dentin-Bonding Agents Cements that act through infiltration and polymerization within the dentinal matrix and are used for dental restoration. They can be adhesive resins themselves, adhesion-promoting monomers, or polymerization initiators that act in concert with other agents to form a dentin-bonding system. Dentin Bonding Agent,Dentin-Bonding Agent,Bonding Agents, Dentin,Agent, Dentin Bonding,Agent, Dentin-Bonding,Agents, Dentin Bonding,Agents, Dentin-Bonding,Bonding Agent, Dentin,Dentin Bonding Agents
D019228 Tooth Crown The upper part of the tooth, which joins the lower part of the tooth (TOOTH ROOT) at the cervix (TOOTH CERVIX) at a line called the cementoenamel junction. The entire surface of the crown is covered with enamel which is thicker at the extremity and becomes progressively thinner toward the cervix. (From Jablonski, Dictionary of Dentistry, 1992, p216) Crown, Tooth,Crowns, Tooth,Tooth Crowns
D019237 Tooth Cervix The constricted part of the tooth at the junction of the crown and root or roots. It is often referred to as the cementoenamel junction (CEJ), the line at which the cementum covering the root of a tooth and the enamel of the tooth meet. (Jablonski, Dictionary of Dentistry, 1992, p530, p433) CEJ,Cementoenamel Junction,Cervix Dentis,Cementoenamel Junctions,Cervix, Tooth,Junction, Cementoenamel,Junctions, Cementoenamel

Related Publications

Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength between adhesive cements and root canal dentin.
May 2003, Dental materials : official publication of the Academy of Dental Materials,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Effect of fluoride iontophoresis on the microtensile bond strength between dentin and two adhesive systems.
September 2008, Journal of dentistry,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
[Influence of different dentin depths on microtensile bond strength of two dentin adhesive systems].
October 2009, Shanghai kou qiang yi xue = Shanghai journal of stomatology,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength of two single-step adhesive systems to bur-prepared dentin.
January 2001, The journal of adhesive dentistry,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength of root canal dentin treated with adhesive and fiber-reinforced post systems.
July 2019, Brazilian oral research,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength of different adhesive systems to primary and permanent dentin.
January 2005, Pediatric dentistry,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength evaluation of three adhesive systems in cervical dentin cavities.
January 2001, The journal of adhesive dentistry,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strength of three simplified adhesive systems to caries-affected dentin.
August 2010, The journal of adhesive dentistry,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
Microtensile bond strengths of seven dentin adhesive systems.
May 2000, Dental materials : official publication of the Academy of Dental Materials,
Mario Fernando De Goes, and Marcelo Giannini, and Richard Mark Foxton, and Toru Nikaido, and Junji Tagami
[Microtensile bond strengths of three dentin adhesive systems].
November 2004, Zhonghua kou qiang yi xue za zhi = Zhonghua kouqiang yixue zazhi = Chinese journal of stomatology,
Copied contents to your clipboard!