BIOMAT Database Logo BIOMAT Database Logo

[Comparative adaptation of crowns of selective laser melting and wax-lost-casting method]. 2012

Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Department of Prosthodontics, Shanghai Stomatological Disease Center, Shanghai 200031, China.

OBJECTIVE To investigate the marginal adaptation of crowns fabricated by selective laser melting (SLM) and wax-lost-casting method, so as to provide an experimental basis for clinic. METHODS Co-Cr alloy full crown were fabricated by SLM and wax-lost-casting for 24 samples in each group. All crowns were cemented with zinc phosphate cement and cut along longitudinal axis by line cutting machine. The gap between crown tissue surface and die was measured by 6-point measuring method with scanning electron microscope (SEM). The marginal adaptation of crowns fabricated by SLM and wax-lost-casting were compared statistically. RESULTS The gap between SLM crowns were (36.51 ± 2.94), (49.36 ± 3.31), (56.48 ± 3.35), (42.20 ± 3.60) µm, and wax-lost-casting crowns were (68.86 ± 5.41), (58.86 ± 6.10), (70.62 ± 5.79), (69.90 ± 6.00) µm. There were significant difference between two groups (P < 0.05). CONCLUSIONS Co-Cr alloy full crown fabricated by wax-lost-casting method and SLM method provide acceptable marginal adaptation in clinic, and the marginal adaptation of SLM is better than that of wax-lost-casting method.

UI MeSH Term Description Entries
D007834 Lasers An optical source that emits photons in a coherent beam. Light Amplification by Stimulated Emission of Radiation (LASER) is brought about using devices that transform light of varying frequencies into a single intense, nearly nondivergent beam of monochromatic radiation. Lasers operate in the infrared, visible, ultraviolet, or X-ray regions of the spectrum. Masers,Continuous Wave Lasers,Pulsed Lasers,Q-Switched Lasers,Continuous Wave Laser,Laser,Laser, Continuous Wave,Laser, Pulsed,Laser, Q-Switched,Lasers, Continuous Wave,Lasers, Pulsed,Lasers, Q-Switched,Maser,Pulsed Laser,Q Switched Lasers,Q-Switched Laser
D002858 Chromium Alloys Specific alloys not less than 85% chromium and nickel or cobalt, with traces of either nickel or cobalt, molybdenum, and other substances. They are used in partial dentures, orthopedic implants, etc. Chromium-Cobalt Alloys,Chromium-Nickel Alloys,Cobalt-Chromium Alloys,Nickel-Chromium Alloys,Alloys, Chromium,Alloys, Chromium-Cobalt,Alloys, Chromium-Nickel,Alloys, Cobalt-Chromium,Alloys, Nickel-Chromium,Chromium Cobalt Alloys,Chromium Nickel Alloys,Cobalt Chromium Alloys,Nickel Chromium Alloys
D003442 Crowns A prosthetic restoration that reproduces the entire surface anatomy of the visible natural crown of a tooth. It may be partial (covering three or more surfaces of a tooth) or complete (covering all surfaces). It is made of gold or other metal, porcelain, or resin. Dental Crowns,Crown, Dental,Crowns, Dental,Dental Crown,Crown
D003735 Dental Casting Technique The process of producing a form or impression made of metal or plaster using a mold. Casting Technic, Dental,Casting Technics, Dental,Casting Technique, Dental,Casting Techniques, Dental,Dental Casting Technic,Dental Casting Technics,Dental Casting Techniques,Technic, Dental Casting,Technics, Dental Casting,Technique, Dental Casting,Techniques, Dental Casting
D005615 Freezing Liquids transforming into solids by the removal of heat. Melting
D017076 Computer-Aided Design The use of computers for designing and/or manufacturing of anything, including drugs, surgical procedures, orthotics, and prosthetics. CAD-CAM,Computer-Aided Manufacturing,Computer-Assisted Design,Computer-Assisted Manufacturing,Computer Aided Design,Computer Aided Manufacturing,Computer Assisted Design,Computer Assisted Manufacturing,Computer-Aided Designs,Computer-Assisted Designs,Design, Computer-Aided,Design, Computer-Assisted,Designs, Computer-Aided,Designs, Computer-Assisted,Manufacturing, Computer-Aided,Manufacturing, Computer-Assisted
D017267 Dental Prosthesis Design The plan and delineation of dental prostheses in general or a specific dental prosthesis. It does not include DENTURE DESIGN. The framework usually consists of metal. Dental Prosthesis Designs,Design, Dental Prosthesis,Designs, Dental Prosthesis,Prosthesis Design, Dental,Prosthesis Designs, Dental
D018772 Dental Marginal Adaptation The degree of approximation or fit of filling material or dental prosthetic to the tooth surface. A close marginal adaptation and seal at the interface is important for successful dental restorations. Adaptation, Marginal, Dental,Marginal Adaptation, Dental,Dental Internal Adaptation,Dental Internal Fit,Adaptation, Dental Internal,Adaptation, Dental Marginal,Adaptations, Dental Internal,Adaptations, Dental Marginal,Dental Internal Adaptations,Dental Internal Fits,Dental Marginal Adaptations,Fit, Dental Internal,Fits, Dental Internal,Internal Adaptation, Dental,Internal Adaptations, Dental,Internal Fit, Dental,Internal Fits, Dental,Marginal Adaptations, Dental

Related Publications

Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Casting techniques in lost wax.
August 1990, The Dental technician,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Selective laser sintering versus conventional lost-wax casting for single metal copings: A systematic review and meta-analysis.
November 2022, The Journal of prosthetic dentistry,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
[Dental fine casting with lost-wax models].
March 1979, Das Dental-Labor. Le Laboratoire dentaire. The Dental laboratory,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Critical Review of Comparative Study of Selective Laser Melting and Investment Casting for Thin-Walled Parts.
November 2023, Materials (Basel, Switzerland),
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
[Comparative study of microleakage by using different finished lines in selective laser melting metal crowns].
December 2016, Shanghai kou qiang yi xue = Shanghai journal of stomatology,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Fit of cobalt-chromium copings fabricated by the selective laser melting technology and casting method: A comparative evaluation using a profilometer.
January 2020, Dental research journal,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
[Construction of metal copings for ceramic-metal unit crowns, without going through the lost wax casting procedure].
February 1978, L' Information dentaire,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Lost wax casting technique for metal crown fabrication.
January 2014, Journal of veterinary dentistry,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
Titanium clasp fabricated by selective laser melting, CNC milling, and conventional casting: a comparative in vitro study.
January 2019, Journal of prosthodontic research,
Guo-qiang Li, and Qing-yi Shen, and Jian-hua Gao, and Xue-ying Wu, and Li Chen, and Wen-an Dai
A survey of casting and melting techniques used in the lost wax casting of yellow gold and metal/ceramic alloys in British dental schools.
February 1989, Restorative dentistry,
Copied contents to your clipboard!