In the field of hyperthermia for cancer treatment, much effort is being put into the development of non-invasive temperature monitoring so that the trauma of implanting thermocouple or thermistor probes in the patient can be avoided. Preliminary studies investigating the use of applied potential tomography (APT) for this purpose have been reported. APT has the advantages over other tomographic methods that the instrumentation is inexpensive, transportable, and could easily be accommodated in a hyperthermia treatment environment. Moreover, the temperature coefficient of electrical conductivity is large (2% degrees C-1) compared, for example, with the corresponding quantity in CT, the x-ray attenuation coefficient, which changes by only 0.04% degrees C-1. In our experimental system, 16 electrodes were fixed around a cylindrical block of agar simulating a human thigh. The system was driven with 5 mA at 50 kHz. The agar was heated using the 13.56 MHz capacitive system currently in clinical use in this hospital. By relating data sets recorded at different times during heating to a set recorded before heating, images of the temperature change in the agar with time were computed and are presented. The experiment was then repeated in vivo on the thigh of a volunteer.