Tensile bond strength of gold and porcelain inlays to extracted teeth using three cements. 1995

F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
Department of Fixed Prosthodontics and Occlusion, School of Dentistry, University of Geneva, Switzerland.

This in vitro study compared the tensile bond strength of gold and porcelain inlays to extracted molars in standardized cavities. Three cements were used: zinc phosphate, glass-ionomer, and a resin composite cement. The gold inlays were cemented using zinc phosphate or glass-ionomer cement, and the porcelain inlays were luted using resin composite or glass-ionomer cement. Surface treatments included, for gold inlays, either no treatment (zinc phosphate cement) or airborne particle abraded and tinplated (glass-ionomer cement); and for porcelain inlays, either no treatment (glass-ionomer cement) or etched and silane-treated (resin composite cement). Statistical analysis was performed using the Weibull distribution. Results showed no significant differences between gold inlays cemented using zinc phosphate or glass-ionomer cements and porcelain inlays luted using glass-ionomer cements. The bonded porcelain inlays (resin composite cement) showed tensile bond strengths two to three times higher than those obtained for cemented gold inlays.

UI MeSH Term Description Entries
D007284 Inlays Restorations of metal, porcelain, or plastic made to fit a cavity preparation, then cemented into the tooth. Onlays are restorations which fit into cavity preparations and overlay the occlusal surface of a tooth or teeth. Onlays are retained by frictional or mechanical factors. Dental Inlays,Dental Onlays,Onlays,Dental Inlay,Dental Onlay,Inlay, Dental,Inlays, Dental,Onlay, Dental,Onlays, Dental,Inlay,Onlay
D008422 Materials Testing The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility. Biocompatibility Testing,Biocompatible Materials Testing,Hemocompatibility Testing,Testing, Biocompatible Materials,Testing, Hemocompatible Materials,Hemocompatibility Testings,Hemocompatible Materials Testing,Materials Testing, Biocompatible,Materials Testing, Hemocompatible,Testing, Biocompatibility,Testing, Hemocompatibility,Testing, Materials,Testings, Biocompatibility
D008963 Molar The most posterior teeth on either side of the jaw, totaling eight in the deciduous dentition (2 on each side, upper and lower), and usually 12 in the permanent dentition (three on each side, upper and lower). They are grinding teeth, having large crowns and broad chewing surfaces. (Jablonski, Dictionary of Dentistry, 1992, p821) Molars
D011475 Prosthesis Failure Malfunction of implantation shunts, valves, etc., and prosthesis loosening, migration, and breaking. Prosthesis Loosening,Prosthesis Durability,Prosthesis Migration,Prosthesis Survival,Durabilities, Prosthesis,Durability, Prosthesis,Failure, Prosthesis,Failures, Prosthesis,Loosening, Prosthesis,Loosenings, Prosthesis,Migration, Prosthesis,Migrations, Prosthesis,Prosthesis Durabilities,Prosthesis Failures,Prosthesis Loosenings,Prosthesis Migrations,Prosthesis Survivals,Survival, Prosthesis,Survivals, Prosthesis
D001840 Dental Bonding An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing. Bonding, Dental,Cure of Orthodontic Adhesives,Curing, Dental Cement,Dental Cement Curing,Orthodontic Adhesives Cure
D003188 Composite Resins Synthetic resins, containing an inert filler, that are widely used in dentistry. Composite Resin,Resin, Composite,Resins, Composite
D003737 Dental Cavity Preparation An operation in which carious material is removed from teeth and biomechanically correct forms are established in the teeth to receive and retain restorations. A constant requirement is provision for prevention of failure of the restoration through recurrence of decay or inadequate resistance to applied stresses. (Boucher's Clinical Dental Terminology, 4th ed, p239-40) Cavity Preparation, Dental,Cavity Preparations, Dental,Dental Cavity Preparations,Preparation, Dental Cavity,Preparations, Dental Cavity
D003738 Dental Cements Substances used to bond COMPOSITE RESINS to DENTAL ENAMEL and DENTIN. These bonding or luting agents are used in restorative dentistry, ROOT CANAL THERAPY; PROSTHODONTICS; and ORTHODONTICS. Dental Adhesives,Luting Agents,Orthodontic Adhesives,Cement, Dental,Cements, Dental,Dental Cement,Adhesive, Dental,Adhesive, Orthodontic,Adhesives, Dental,Adhesives, Orthodontic,Dental Adhesive,Luting Agent,Orthodontic Adhesive
D003776 Dental Porcelain A type of porcelain used in dental restorations, either jacket crowns or inlays, artificial teeth, or metal-ceramic crowns. It is essentially a mixture of particles of feldspar and quartz, the feldspar melting first and providing a glass matrix for the quartz. Dental porcelain is produced by mixing ceramic powder (a mixture of quartz, kaolin, pigments, opacifiers, a suitable flux, and other substances) with distilled water. (From Jablonski's Dictionary of Dentistry, 1992) Porcelain,Porcelain, Dental,Dental Porcelains,Porcelains,Porcelains, Dental
D003799 Dental Stress Analysis The description and measurement of the various factors that produce physical stress upon dental restorations, prostheses, or appliances, materials associated with them, or the natural oral structures. Analyses, Dental Stress,Analysis, Dental Stress,Stress Analyses, Dental,Stress Analysis, Dental,Dental Stress Analyses

Related Publications

F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
October 1988, The Journal of prosthetic dentistry,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
July 1946, Dental laboratory review,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
January 1998, The International journal of prosthodontics,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
January 2007, Operative dentistry,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
January 2011, International journal of computerized dentistry,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
November 2013, The journal of advanced prosthodontics,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
September 2007, Dental materials journal,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
February 1972, Dental survey,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
May 2003, American journal of orthodontics and dentofacial orthopedics : official publication of the American Association of Orthodontists, its constituent societies, and the American Board of Orthodontics,
F S Michelini, and U C Belser, and S S Scherrer, and W G De Rijk
March 1985, The Journal of Nihon University School of Dentistry,
Copied contents to your clipboard!