Class I and Class II restorations of resin composite: an FE analysis of the influence of modulus of elasticity on stresses generated by occlusal loading. 2008

Erik Asmussen, and Anne Peutzfeldt
Department of Dental Materials, School of Dentistry, University of Copenhagen, 20 Nørre Alle, 2200 Copenhagen N, Denmark. ea@odont.ku.dk

OBJECTIVE It was the aim of the study to analyze by the FE method stresses generated in tooth and restoration by occlusal loading of Class I and Class II restorations of resin composite. On the basis of available information on the influence of the modulus of elasticity, the research hypothesis was that the marginal stresses would decrease with increasing modulus of elasticity of the restoration. METHODS A cylindrical tooth was modelled in enamel and dentin and fitted with a Class I or a Class II restoration of resin composite. In one scenario the restoration was bonded to the tooth, in another the restoration was left nonbonded. The resin composite was modelled with a modulus of elasticity of 5, 10, 15 or 20 GPa and loaded occlusally with 100 N. By means of the soft-ware program ABAQUS the von Mises stresses in enamel and dentin were calculated. RESULTS In the bonded scenario, the maximum stresses in the enamel were located at the occlusal margins (range 7-11 MPa), and in the dentin centrally at the pulpal floor (range 3.4-5.5MPa). The stresses decreased with increasing modulus of elasticity of the resin composite. In the nonbonded scenario, the stresses were higher in the dentin and lower in the enamel than in the bonded cases, and the influence of the modulus of elasticity was less pronounced. The marginal stresses in the restoration were below 6 MPa in the bonded scenario and below 3 MPa in the nonbonded scenario. CONCLUSIONS Occlusal restorations of resin composite should have a high modulus of elasticity in order to reduce the risk of marginal deterioration.

UI MeSH Term Description Entries
D008422 Materials Testing The testing of materials and devices, especially those used for PROSTHESES AND IMPLANTS; SUTURES; TISSUE ADHESIVES; etc., for hardness, strength, durability, safety, efficacy, and biocompatibility. Biocompatibility Testing,Biocompatible Materials Testing,Hemocompatibility Testing,Testing, Biocompatible Materials,Testing, Hemocompatible Materials,Hemocompatibility Testings,Hemocompatible Materials Testing,Materials Testing, Biocompatible,Materials Testing, Hemocompatible,Testing, Biocompatibility,Testing, Hemocompatibility,Testing, Materials,Testings, Biocompatibility
D008954 Models, Biological Theoretical representations that simulate the behavior or activity of biological processes or diseases. For disease models in living animals, DISEASE MODELS, ANIMAL is available. Biological models include the use of mathematical equations, computers, and other electronic equipment. Biological Model,Biological Models,Model, Biological,Models, Biologic,Biologic Model,Biologic Models,Model, Biologic
D001732 Bite Force The force applied by the masticatory muscles in dental occlusion. Masticatory Force,Occlusal Force,Bite Forces,Force, Bite,Force, Masticatory,Force, Occlusal,Forces, Bite,Forces, Masticatory,Forces, Occlusal,Masticatory Forces,Occlusal Forces
D001840 Dental Bonding An adhesion procedure for orthodontic attachments, such as plastic DENTAL CROWNS. This process usually includes the application of an adhesive material (DENTAL CEMENTS) and letting it harden in-place by light or chemical curing. Bonding, Dental,Cure of Orthodontic Adhesives,Curing, Dental Cement,Dental Cement Curing,Orthodontic Adhesives Cure
D003188 Composite Resins Synthetic resins, containing an inert filler, that are widely used in dentistry. Composite Resin,Resin, Composite,Resins, Composite
D003198 Computer Simulation Computer-based representation of physical systems and phenomena such as chemical processes. Computational Modeling,Computational Modelling,Computer Models,In silico Modeling,In silico Models,In silico Simulation,Models, Computer,Computerized Models,Computer Model,Computer Simulations,Computerized Model,In silico Model,Model, Computer,Model, Computerized,Model, In silico,Modeling, Computational,Modeling, In silico,Modelling, Computational,Simulation, Computer,Simulation, In silico,Simulations, Computer
D003743 Dental Enamel A hard thin translucent layer of calcified substance which envelops and protects the dentin of the crown of the tooth. It is the hardest substance in the body and is almost entirely composed of calcium salts. Under the microscope, it is composed of thin rods (enamel prisms) held together by cementing substance, and surrounded by an enamel sheath. (From Jablonski, Dictionary of Dentistry, 1992, p286) Enamel,Enamel Cuticle,Dental Enamels,Enamel, Dental,Enamels, Dental,Cuticle, Enamel,Cuticles, Enamel,Enamel Cuticles,Enamels
D003764 Dental Materials Materials used in the production of dental bases, restorations, impressions, prostheses, etc. Dental Material,Material, Dental,Materials, Dental
D003793 Dental Restoration, Permanent A restoration designed to remain in service for not less than 20 to 30 years, usually made of gold casting, cohesive gold, or amalgam. (Jablonski, Dictionary of Dentistry, 1992) Dental Fillings, Permanent,Dental Filling, Permanent,Dental Permanent Filling,Dental Permanent Fillings,Dental Restorations, Permanent,Filling, Dental Permanent,Filling, Permanent Dental,Fillings, Dental Permanent,Fillings, Permanent Dental,Permanent Dental Filling,Permanent Dental Fillings,Permanent Dental Restoration,Permanent Dental Restorations,Permanent Filling, Dental,Permanent Fillings, Dental,Restoration, Permanent Dental,Restorations, Permanent Dental
D003804 Dentin The hard portion of the tooth surrounding the pulp, covered by enamel on the crown and cementum on the root, which is harder and denser than bone but softer than enamel, and is thus readily abraded when left unprotected. (From Jablonski, Dictionary of Dentistry, 1992) Dentine,Dentines,Dentins

Related Publications

Erik Asmussen, and Anne Peutzfeldt
January 1993, ASDC journal of dentistry for children,
Erik Asmussen, and Anne Peutzfeldt
April 2020, Journal of the mechanical behavior of biomedical materials,
Erik Asmussen, and Anne Peutzfeldt
September 1987, Tsurumi shigaku. Tsurumi University dental journal,
Erik Asmussen, and Anne Peutzfeldt
March 2019, The Cochrane database of systematic reviews,
Erik Asmussen, and Anne Peutzfeldt
October 2016, The Cochrane database of systematic reviews,
Erik Asmussen, and Anne Peutzfeldt
June 1990, Odontostomatologike proodos,
Copied contents to your clipboard!